Deals with metal dust (1st December 2008)

Surface metal dust from a dedicated stainless steel fabrication cell at ERI of Oldbury is being removed by a Nonflam W220 unit, specified and installed by Carter Environmental Engineers (CEE).

From Breathing safely

Compact dust extraction unit (1st August 2008)

The compact Cyclovent dust extraction unit from Carter Environmental Engineers (CEE) has been developed from the company's standard Cyclovent range to offer all the system's advantages in a compact, stand-alone unit.

From Breathing safely

For hot sparks and damp dusts (1st June 2008)

Cater Environmental Engineers (CEE) has installed a W50 Dustand Nonflam at the Bird Bellows division of Senior Aerospace to handle dust generated in titanium polishing operations.

From Breathing safely

Extracts the dust (1st April 2008)

Five Carter-Midac AS820 Autosludge wet dust collectors from Carter Environmental Engineers are used by the West London Waste household refuse facility in Brentford.

From Breathing safely

Removes steel dusts (1st February 2008)

International security equipment group, Gunnebo, has installed a Carter- Thorne stainless steel Nonflam wet dust extraction unit in its Uckfield facility.

From Breathing safely

Dust extraction unit (1st December 2007)

A W80 Nonflam dust extraction unit and downdraught bench from Carter Environmental have been installed at Leeds College of Building.

From Breathing safely

Extracts the dust (1st August 2007)

Carter-Thorne has installed a Polytex L22 dust extraction unit at the Cirencester factory of Corin Medical, manufacturer of orthopaedic devices.

The L22 handles metal dusts created at four workstations used for polishing com

From Breathing safely

Extracts the dust (1st August 2007)

Carter-Thorne has installed a Polytex L22 dust extraction unit at the Cirencester factory of Corin Medical, manufacturer of orthopaedic devices.

The L22 handles metal dusts created at four workstations used for polishing com

From Breathing safely

Wet dust collectors (1st June 2007)

Carter Environmental Engineers has installed five Carter-Midac AS820 Autosludge wet dust collectors at the West London Waste household refuse facility in Brentford.

From Breathing safely

Removes oil mist (1st April 2007)

Carter Environmental Engineers has installed an abatement plant to remove oil mist generated in the cold reduction of sheet steel products at the Llanwern steelworks of Corus.

Four Carter-Midac Pacific oil mist collectors ar

From Breathing safely

Wet dust extractor (1st February 2007)

The compact W50 Dustand Nonflam wet dust extractor from Carter-Thorne combines effective operation with space-saving design.

The W50 fits under a workbench or can act as a bench for other small machines. It can be used where

From Breathing safely

Wet dust collectors (1st August 2006)

Doncasters Medical Technologies has installed three dust extraction units from Carter-Thorne for its forging and finishing operations in Sheffield.

From Breathing safely

Collects wet dust (1st June 2006)

Lincat, manufacturer of commercial catering equipment, has installed two Nonflam W120 dust extraction units from Carter- Thorne at its Lincoln site.

From Breathing safely

Greater capacity for new dust unit (1st April 2006)

A new Nonflam wet dust collection unit has been introduced by Carter-Thorne.

From Breathing safely

Reverse jet filter (1st February 2006)

Dust extraction equipment from Carter Environmental Engineers (CEE) is used in a flue gas desulphurisation project at a coal-fired power station in Lincolnshire.

From Breathing safely

Ejects the dust for ejection seat maker (1st February 2006)

A Nonflam W120 from Carter-Thorne is providing dust extraction for polishing operations at Denham-based Martin-Baker, manufacturer of aircraft ejection seats.

From Breathing safely

Reverse jet filter (1st December 2005)

Carter Environmental Engineers has supplied dust extraction equipment for use in a flue gas desulphurisation project at a coal-fired power station in Lincolnshire.

From Breathing safely

EXTRACTION UNIT DEALS WITH DUST (1st October 2005)

CRE, manufacturer of refrigerated retail display cases has installed a Carter-Thorne Nonflam W120 wet dust extraction unit at its Birmingham production facility.

From Breathing safely

For dust extraction (1st August 2005)

Two Polytex dust extraction units from Carter-Thorne have been installed at the Stalybridge premises of Pigments, a company that makes daylight fluorescent pigments for a range of high visibility products.

From Breathing safely

Deals with wood dust (1st June 2005)

For the Rycotewood Furniture Centre, moving to new workshops and design studios in Oxford meant the installation of new dust extraction equipment.

From Breathing safely

Extracts dust (1st April 2005)

A Carter-Thorne Nonflam W185 wet dust extraction unit, with ducting to provide extraction on two separate processes, has been installed by Euro Sheet Metal, West London.

From Breathing safely

DUST AND FUME REMOVAL SYSTEM (1st December 2004)

A Nonflam W220 wet dust extraction unit from Carter-Thorne has been installed in the polishing department of Shortt Stainless Steel in Co.

From Breathing safely

Copes with coal dust (1st December 2004)

A complete dust extraction system from Carter Environmental Engineers (CEE) is now in operation at Fiddlers Ferry power station coal plant.

From Breathing safely

Less energy required (1st October 2004)

Wisbech-based Greenvale Foods has installed extraction equipment made by the air services division of Carter Environmental Engineers (CEE) to remove starch and product-laden steam from its potato processing plant.

From Breathing safely

Dust extraction (1st June 2004)

A W120 Nonflam wet dust extraction unit by Carter-Thorne has been installed at the Milton Keynes plant of THK. Here the Nonflam removes dust created by the cutting of toughened steel rails that are used to carry THKs caged ball linear guides. Nonflam

From News