Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Saturday, 26th of May 2012
Health & Safety Matters
 hsmsearch.com
Search 
Magazine 
Register for our ENewsletter
Click to visit http://www.toyota-forklifts.co.uk/EN/resources/Pages/default.aspx
Click to visit http://www.uvex-safety.co.uk/

Click to visit http://solutions.3m.co.uk/wps/portal/3M/en_GB/OccSafety/Home/Products_for/RespiratoryProtection/Particulate-Respirator/

Poll : May
Will you be getting involved in EU-OSHA's Healthy Workplaces campaign?
This is an anonymous poll for statistical purposes only
Last Month's Poll

In the wake of the "Jerry Can" advice controversy, should Francis Maude have quit?

Yes : 56%

No : 44%

Follow Health & Safety Matters on Twitter

Low range CO2 IAQ analyser
February 1st 2010

The new Geotech G150 CO2 Analyser has the accuracy essential for IAQ measurements in very low CO2 concentrations. The G150 also has options for O2, temperature, humidity and PC/Internet connection. It measures CO2 at 0- 10,000ppm and O2 at 0-100%, is simple to operate and has a crystalclear backlit screen for operation in adverse lighting conditions.

At the heart of the G150, is a new infrared absorption cell with increased length for low-levels CO2 to give maximum sensitivity and accuracy. This accuracy is essential for very low CO2concentrations in IAQ tests. In normal fresh air CO2 ranges between 380-420ppm while concerns with sick building syndrome start with CO2 as low as 500ppm.

The on-board rechargeable battery lasts for more than 12 hours. Data can be screen-viewed or downloaded to Geotech's optional Software.

More articles from Geotechnical Instruments (UK) Limited: