Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Saturday, 26th of May 2012
Health & Safety Matters
 hsmsearch.com
Search 
Magazine 
Register for our ENewsletter
Click to visit http://www.toyota-forklifts.co.uk/EN/resources/Pages/default.aspx
Click to visit http://www.uvex-safety.co.uk/

Poll : May
Will you be getting involved in EU-OSHA's Healthy Workplaces campaign?
This is an anonymous poll for statistical purposes only
Last Month's Poll

In the wake of the "Jerry Can" advice controversy, should Francis Maude have quit?

Yes : 56%

No : 44%

Follow Health & Safety Matters on Twitter

Self-erecting tower crane
December 1st 2007

An AT7 mobile, self-erecting tower crane has been used to lift an SGB scaffold beam bridge structure at Gatwick's South Terminal. The bridge weighs 6t and SGB believes the AT7 to be the only crane in the UK which can lift such a structure due to restrictions on conventional mobile crane operations so close to the flight path.

The crane can reach heights in excess of 50m and lift weights of 5500kg at a radius of 42m. However, the maximum crane working height could not exceed 36m due to aircraft flight path restrictions, but still needed to lift 6000kg at a radius of 32m over a 25m tall building.

The SGB bridge, built from Coverspan alloy beams, was designed to create a box beam that would allow installation and movement of structural steel and carry a 2t air handling unit. It is 21 by 4.2m and is supported by the South Terminal roof at one end and by a freestanding scaffold support tower at the other.

More articles from Harsco Infrastructure: