J.D.Neuhaus Limited, Gas & oil industry hoists

Health & Safety Matters

hsmsearch.com

Click to visit http://www.toyota-forklifts.co.uk/EN/resources/Pages/default.aspx


	What next? Request further Information visit web site Send to friend J.D.Neuhaus Limited company's profile

Click to visit http://www.uvex-safety.co.uk/

Poll : May

Will you be getting involved in EU-OSHA's Healthy Workplaces campaign?

This is an anonymous poll for statistical purposes only

Last Month's Poll

In the wake of the "Jerry Can" advice controversy, should Francis Maude have quit?

Yes : 56%

No : 44%

Follow Health & Safety Matters on Twitter

Gas & oil industry hoists
October 1st 2011

For specialised applications such as the oil and gas industry, where safety and reliability are primary requisites, J D Neuhaus can supply hoists with a lift capacity range from 0.25kg up to 100t, to API7K certification.

These are highly durable products, rated explosion proof/spark resistant and powered by compressed air or hydraulics, with corrosion resistant options also available. Customised lifting and control systems can be accommodated with load test certifications available through DNV, ABS, Lloyds and others.

Typical land-based or offshore equipment loads include BOP handling, and FPSO (Floating Production, Storage and Offloading) vessel mooring/tensioning, together with a wide range of general materials handling requirements on jack-up rigs, semi-submersibles, drill ships etc.

Specialised hoist applications have also been developed for operation in low temperature 'cryogenic' conditions, together with hoists for subsea operation down to levels of 70m.

More articles from J.D.Neuhaus Limited:

Energy feed systems (1st April 2012)

The lifting, handling and craneage equipment manufactured by J D Neuhaus is powered by compressed air, with the option of hydraulically powered products. The equipment is safe to operate in areas where potentially explo

From Handling storing

Heavy work (1st February 2012)

J D Neuhaus’s Profi TI series hoists are suitable for surface and underground working, operating off air pressures of 4 or 6 bar, with hydraulically operated units also available.

From Safety first

Semi portal design crane (1st February 2012)

The largest crane system constructed to date by J D Neuhaus has been delivered to Westcon Lofteteknikk AS (WCL) of Norway for use on an offshore drilling rig.

From Handling storing

Air hoist lifts 125 tonnes (1st November 2011)

What is believed to be the world's first air operated hoist with a lift capacity of 125t has been manufactured by materials handling and lifting specialist, J D Neuhaus. This is the most powerful unit in the company's E

From Plant machinery

Be let down gently by J D Neuhaus (1st November 2011)

As part of an ongoing safety evaluation for its products, J D Neuhaus has introduced an emergency lowering device for its EH range of air operated monorail hoists.

From Slips trips falls

Tough enough for offshore (1st September 2011)

Visitors to the the Offshore Europe 2011 exhibition, 6th-8th September, Aberdeen, will be able to see lifting and handling equipment from J D Neuhaus (Hall 5 Stand 5D111) that been designed to withstand the toughest ope

From Handling storing

New hoist range (1st April 2011)

J D Neuhaus has launched a new generation of purpose designed monorail air hoists.

From Handling storing

Honda gets a lift (1st November 2010)

Air operated hoists supplied by Swindon Lifting from the J D Neuhaus Mini range have been successfully deployed on Honda of the UK Manufacturing's engine block machining section.

From Handling storing

Offshore crane (1st November 2010)

A J D Neuhaus hydraulically operated crane with 80t lift capacity has been delivered for operation on the semisub rig Spitsbergen, designed and built by Aker Solutions for operation on the Norwegian continental shelf.

From Handling storing

Tough chain reaction (1st September 2010)

A typical subsea operation involving J D Neuhaus air and hydraulic operated chain hoists was recently shown on the National Geographic 'World's Toughest Fixes' programme. It covered the removal, repair and eventual repl

From Handling storing

Hoisting the main sails (1st June 2010)

Rugged, safe and reliable lifting are said to be the key qualities for JD Neuhaus air operated lifting equipment for the shipyard and offshore industries.

From Handling storing

Lifting options for explosive areas (1st September 2009)

J D Neuhaus manufactures a range of Ex rated handling equipment, including hydraulically operated hoists and monorail hoists, for safe operation within hazardous and explosion endangered areas. This equipment offers

From Handling storing

Hoists for food (1st October 2008)

J D Neuhaus now offers air hoists to meet food industry hygiene requirements.

From Handling storing

Giving a lift to maintenance (1st June 2008)

A JD Neuhaus Profi puller winch has helped maintain electric power and water supplies for an American city. Routine maintenance performed by the Salt River Project company, responsible for utility services for metropo

From Handling storing

Lightweight and portable hoists and winches (1st April 2008)

As well as hoists and cranes with load capacities up to 100 tonnes, J D Neuhaus is now offering a wide range of compact lifting equipment that is lightweight enough to provide portable material handling capabilities to

From Handling storing

Hoist handles long load (1st December 2007)

An air operated hoist from J D Neuhaus has been used for the safe handling of an assembled pipeline string of some 1000m in length. This involved the connection of individual pipeline sections, each 8m long, to create

From Handling storing