Campbell Associates Ltd, Hiring a solution to noise measurement

hsmsearch.com

Click to visit http://www.evacchair.co.uk


	What next? Request further Information visit web site Send to friend Campbell Associates Ltd company's profile

Hiring a solution to noise measurement
August 1st 2007

Campbell Associates' (CA) Acoustic Instrumentation Hire Service offers sound level meter kits to enable users to carry out noise at work surveys.

They are all BS EN pattern evaluated kits with accredited calibration certificates. A step-by-step application note has also been produced to guide the assessor through the risk assessment procedures required.

The company says that hiring ensures that capital is not tied up in instruments that only have intermittent use.

More articles from Campbell Associates Ltd:

Meter checks on vibration (1st April 2008)

New regulations now limit the exposure of employees to both hand arm and whole body vibration. The MMFVM30 Human Vibration Meter meets all the requirements of the Standards mentioned in the HSE Guidance and can be use

From Construction site safety

Checks on vibration (1st December 2007)

From Plant machinery

Checks on vibration (1st December 2007)

From Plant machinery

Latest software (1st October 2007)

The EU directives on noise labelling of many types of machinery, both domestic and industrial, are now implemented into UK law. These require products to carry a noise label that gives the sound power level. From this

From Managing safety

Hiring a solution to noise measurement (1st August 2007)

Campbell Associates' (CA) Acoustic Instrumentation Hire Service offers sound level meter kits to enable users to carry out noise at work surveys.

They are all BS EN pattern evaluated kits with accredited calibration certific

From Managing safety

Hiring a solution to noise measurement (1st August 2007)

Campbell Associates' (CA) Acoustic Instrumentation Hire Service offers sound level meter kits to enable users to carry out noise at work surveys.

They are all BS EN pattern evaluated kits with accredited calibration certific

From Managing safety

Survey kits to hire (1st June 2007)

The Noise at Work Regulations 2005 came into force in April 2006 prompting a fresh look at noise problems in the work place to ensure that the new lower noise exposure limits are a reality.

From Managing safety

Noise measurements in explosive atmospheres (1st February 2007)

Regulations covering both noise at work and the environmental impact of industrial plant require noise assessments to be made from time to time to demonstrate compliance.

This can present problems in those industries where i

From Managing safety

Human vibration meter introduced (1st October 2006)

Available from Campbell Associates, the new VM30-H human vibration meter has been introduced to meet the requirements of the 2005 Control of Vibration at Work Regulations.

The meter provides a simple means of measuring and q

From Plant machinery

Simple to use (1st August 2006)

Norsonic can provide sound level meters and software to help employers ensure that they are complying with the latest noise at work legislation.

From Managing safety

Meter measures vibration risk (1st June 2006)

A human vibration meter has been introduced by Campbell Associates to meet the requirements of the 2005 Control of Vibration at Work Regulations.

From Construction site safety

Meter and software (1st April 2006)

Available from Campbell Associates, Norsonic's Nor132 sound level meter is robust in design and simple to operate, helping the user to carry out a risk assessment for noise.

From Managing safety

New Noise Regs: Are you ready? (1st December 2005)

New noise at work legislation is due to come into force in early 2006 which will bring changes to many workplaces throughout the UK.

From Safety first