A bone aching problem: Tackling MSDs in the workplace
May 1st 2010 Last year an estimated 538,000 UK workers believe they suffered from a musculoskeletal disorder that was caused or made worse by their work; the BSIF highlights the importance of considering MSDs when carrying out a workplace risk assessment
In 2008/09, according to the Labour Force Survey, an
estimated 538,000 people in Great Britain who had worked
in the last year, believed they were suffering from a
musculoskeletal disorder that was caused or made worse by
their current or past work. This equates to 1.8 per cent of those
who worked in the UK in the last 12 months and of these, over
half were suffering from a new work-related musculoskeletal
disorder. The figures alone show what a significant problem
this is and one that every employer needs to be aware of to
ensure they are protecting their staff to the best of their ability.
Musculoskeletal disorders (MSDs) vary greatly affecting muscles,
joints, tendons and other parts of the body causing problems
such as lower back pain, joint injuries and repetitive strain
injuries. They are the most common occupational illness in the
UK and risk factors causing MSDs can be found in virtually
every workplace. Injury can happen while doing any activity that
involves some movement of the body, from heavy lifting to typing;
consequently workers in almost every sort of job are at some risk.
It is therefore essential to consider MSDs when carrying out a
workplace risk assessment. A variety of tasks and factors can
increase the risk of musculoskeletal injuries, including repetitive
and heavy lifting, bending and twisting, repeating an action too
frequently, an uncomfortable working position, adverse working
environment (e.g. hot, cold) etc. An estimated 11.6 million
working days a year are lost to work-related MSDs and the
Labour Force Survey shows that an estimated 9.3 million
working days (full-day equivalent) were lost in 2008/09 through
MSDs caused or made worse by work. By ignoring these risks,
not only will employers be disregarding their duty under the
Health & Safety Offences Act 2008, but the possible consequence
of lost working days will also potentially harm their business.
This is significant to all businesses but will have added impact on
the SME market.
While in most cases, employers seek to eliminate risks
identified through a comprehensive assessment, by changing
working procedures and environment, this is not always possible
as the cause of MSDs is so varied. There is, however, a variety of
precautionary measures an employer can take to reduce the risk.
These can depend upon the sort of work employees carry out
and what it is 'reasonably practical' for your company to do. The
first step is to assess all the MSD risks the tasks generate. Then,
try to eliminate as many of them as possible, by, for example,
redesigning the tasks, providing mechanical aids or changing
desk layout. This has now been made easier following the launch
of a new online Assessment of Repetitive Tasks (ART) tool.
Developed by the Health and Safety Executive (HSE) and Health
and Safety Laboratory (HSL), ART can help identify where
significant risks lie and suggest where to focus risk reduction
measures to reduce the likelihood of employees suffering from
MSDs of the upper limbs associated with repetitive tasks.
Some jobs will have risks which will be unavoidable such as
manual handling. However with practical advice, training and
deployment of a handling aid e.g. a pallet truck, electric or hand
powered hoist, or a conveyor, the risk will be minimised. Where
a mechanical aid or safety equipment is needed it is important to
ensure that it is suitable for the job and also conforms to
standards if necessary. If uncertain, advice can be sought from
the British Safety Industry Federation (BSIF) who, with its core
purpose to support and represent suppliers, acts as a valuable
information source, providing direction in all health and safety
matters.
Most personal protective equipment (PPE) will need to
conform to the requirements of the PPE Directive. However with
other [non-personal] safety equipment the laws are different and
vary. In some cases the products will need to comply with
specific regulations and in other instances no regulations exist.
Whether they do or do not, the Health and Safety at Work Act
will apply in the same way as it does regarding the selection,
deployment and use of all safety equipment.
By working with a member of the BSIF, purchasers can be
assured that they are using a reputable supplier who is
committed to issuing genuine and suitable products and offering
trustworthy advice.
Statistics gathered through the Labour Force Survey suggest
that the overall incidence rate of self-reported work-related
MSDs has fallen over the period 2001/02 to 2008/09.
However as the most common occupational injury, the
BSIF would like to see the number of MSDs continue to fall
and encourages employers to seek out advice and use the tools
available to ensure risks leading to these are minimised.
For further advice on any of the issue contained within this
article or to search for a Registered Safety Supplier, visit
www.bsif.co.uk. The ART tool is available online at
www.hse.gov.uk/msd/uld/art. More articles from BSIF Enterprise: | 
