Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Saturday, 04th of July 2009
Health & Safety Matters
 hsmsearch.com
Search 
Magazine 
Register for our ENewsletter
Click to visit http://www.cirrusresearch.co.uk/hsmsearch/index.php

Click to visit sponsors web site

Click to visit http://www.laidler.co.uk/workshops

Click to visit sponsors web site

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit http://www.theenergyevent.com/

Poll

Should there be a maximum working temperature?
This is an anonymous poll for statistical purposes only


Last Month's Poll

Would a greater management presence on the shop floor improve health and safety in your workplace?

Yes - 58%

No - 42%

Monitors most motors
April 1st 2005

Castell has developed an ASi-compatible motor safety relay that can monitor almost all electrical motors, including variable-speed drives.

The CMM200 now has a filtering system to reject the interference produced by VSDs that can sometimes affect similar relays. A vampire connector on the side of the unit fits a standard ASi cable and provides a Category 4 signal to the ASi master interface.

The DIN-rail mountable device monitors the back EMF generated by a motor to detect whether it is safely at rest or in motion.

The company believes it to be the only back EMF device to be controlled by dual mircoprocessors that continually check the state of the motor and the condition of the relay itself.

More articles from Castell Safety International Ltd: