Norbar Torque Tools Limited, Multi channel

hsmsearch.com

Click to visit http://www.toyota-forklifts.co.uk/EN/resources/Pages/default.aspx


	What next? Request further Information visit web site Send to friend Norbar Torque Tools Limited company's profile

Click to visit http://www.laidler.co.uk/workshops

Click to visit http://www.uvex-safety.co.uk/

Poll : May

Will you be getting involved in EU-OSHA's Healthy Workplaces campaign?

This is an anonymous poll for statistical purposes only

Last Month's Poll

In the wake of the "Jerry Can" advice controversy, should Francis Maude have quit?

Yes : 56%

No : 44%

Follow Health & Safety Matters on Twitter

Multi channel
November 1st 2011

New from Norbar Torque Tools is a Multi Channel Lubro for regulating air pressure when using pneumatic torque multipliers and other pneumatic tools. The device allows the operator to undertake multiple applications without having to continually refer back to air pressure graphs and without then manually adjusting the pressure setting.

Up to 15 programmable channels are available for multiple applications and settings are protected by supervisor key control. A useful write-on label located on the front of the Multi Channel Lubro can record up to 15 air pressures in psi/bar together with job references and torque measurement settings in Newton metres. These features ensure consistency when different operators have set a particular pressure.

More articles from Norbar Torque Tools Limited:

Torque scewdrivers (1st February 2012)

New from Norbar, the TruTorque range of torque screwdrivers includes adjustable tools for flexible use and fixed torque versions – 'P' Types – that have been designed for the production environment and are pre-set for s

From Managing safety

Quiet alternative to impact wrench (1st November 2010)

The new TrukTorque pneumatic torque multiplier from Norbar Torque Tools features a special banana shaped design reaction arm to handle bolt tightening on both front and rear wheels of trucks and buses. The design also

From Construction site safety

Good vibrations (1st June 2010)

Tests carried out by the HSE have demonstrated that vibration exposure for operators using pneumatic torque multipliers to tighten wheel nuts was 10 times lower than when traditional impact wrenches are used. The Norbar

From Plant machinery

Good vibrations (1st October 2009)

Research commissioned by Norbar Torque Tools compared the vibration effects on the user between a typical impact wrench and its Pneutorque torque tool in a typical truck garage environment.

From Construction site safety

Hammerless drain valve cuts vibration (1st October 2007)

The McKenna hammerless drain valve from Alcoa World Alumina Australia was awarded 'Highly Commended' in Western Australia's Chamber of Minerals & Energy Occupational Safety and Health Innovations awards.

From Plant machinery

Tool report highlights vibration risk (1st December 2005)

Pneumatic impact wrenches such as those typically used for commercial vehicle wheel bolting could prove hazardous to health if operated for more than a few minutes a day, reports Norbar Torque Tools.

From Safety first