Dates released for C&G courses (1st September 2011)

Murex Welding Products has announced dates for its 2012 City & Guilds Accredited Gas Equipment Inspectors training courses.

From Training

New brochure available (1st August 2011)

A new brochure with details on the Murex range of Saffire Multi-Stage Regulators is available.

From Plant machinery

Free safe use guide (1st April 2011)

Standards and practices relating to oxy-fuel cutting and welding safety are the subject of continual change – especially with the globalization of national and European standards.

From Breathing safely

Gas inspector training course to be won (1st April 2011)

Murex Welding Products is offering the opportunity to win a free place on a Certified Gas Inspectors Course. These courses are designed to qualify persons to conduct full safety checks on individual oxy-fuel gas welding

From Training

Gas equipment inspectors course (1st February 2011)

City & Guilds Accredited Gas Equipment Inspectors training courses will be run throughout 2011 by Murex Welding Products.

From Training

Gas certification (1st November 2010)

Murex Welding Products' City & Guilds Accredited Gas Equipment Inspectors training courses will take place throughout next year.

From Training

Oxy-fuel welding and cutting: Beyond the risk assessment (1st October 2010)

When it comes to oxy-acetylene welding or cutting, consideration needs to be given towhat should happen after the risk assessment has taken place - and this is where many companies fall short says Paul Woodford

From Plant machinery

Gas equipment inspectors courses (1st September 2010)

Spaces are still available on a number of Murex Welding Products' 2010 City & Guilds Accredited Gas Equipment Inspectors training courses, which will take place on various dates from September to December.

From Premises

World of welding (1st September 2010)

Murex Welding Products has updated all its handy wall guides to MIG, TIG, MMA, Cored Wire, Oxy- Fuel Gas Welding and Cutting.

From Training

Inspectors courses still (1st June 2010)

Spaces are still available on a number of Murex Welding Products' City & Guilds 2010 Accredited Gas Equipment Inspectors training courses.

From Training

2010 Gas equipment inspector courses:dates announced (1st February 2010)

2010 dates for City & Guilds Accredited Gas Equipment Inspectors training courses have been announced by Murex Welding Products. Those responsible for the practical safety aspects of oxy-fuel gas systems could benefit f

From Training

Gas safety training (1st February 2009)

Murex Welding Products has announced new City & Guilds Accredited Gas Equipment Inspectors training courses for 2009. The courses are designed to provide qualifications which allow individuals to conduct full safety che

From Training

Gas courses planned (1st February 2008)

Murex Welding Products has announced dates for its City & Guilds of London Accredited Gas Equipment Inspector Courses.

From Training

Inspection date mark (1st August 2007)

To underline the need for safety in the workplace, the British Compressed Gases Association recommends that flashback arrestors and pressure regulators should be replaced or refurbished every five years, or earlier if recomme

From Plant machinery

Inspection date mark (1st August 2007)

To underline the need for safety in the workplace, the British Compressed Gases Association recommends that flashback arrestors and pressure regulators should be replaced or refurbished every five years, or earlier if recomme

From Plant machinery

Flashback arrestors (1st June 2007)

Murex offers two types of Saffire flashback arrestor, both designed to provide maximum protection for the operator and his equipment in the event of a flashback.

From Plant machinery

Course covers oxy-fuel gas systems (1st June 2007)

Murex Welding Products has places available on its new City & Guilds Accredited Gas Equipment Inspectors training courses for 2007.

From Training

FREE CD ON OXY-FUEL PROCESS (1st February 2007)

Murex Welding Products’ Safe Use of Oxy-Fuel Gas Equipment publication is now available on CD.

Available free of charge, it provides information on all the key areas relating to the oxy-fuel gas process – from legislation and

From Training

Multi-stage regulators (1st October 2006)

A new brochure from Murex Welding Products details the company's range of Saffire multi-stage regulators. These are said to provide precise control of gases and all models are 300bar compatible.

Saffire 300 Series2+ units ar

From Plant machinery

New guide to oxyfuel equipment (1st August 2006)

Murex Welding Products has published the fourth edition of its well-known handbook The Safe Use of Oxy-Fuel Gas Equipment.

From Plant machinery

Seminar focuses on oxy-fuel process (1st June 2006)

In response to increased use of the oxy-fuel gas process Murex Welding Products has introduced purposedesigned Hazard Awareness and Risk Assessment seminars

From Training

Welding safety (1st December 2005)

Safety is the theme of the new Murex Saffire gas welding and cutting equipment range.

From Plant machinery

FREE CD HIGHLIGHTS PPE FOR WELDERS (1st October 2005)

Personal protective equipment, health and safety products and general welding accessories are the highlights of a new CD available from Murex Welding Products.

From Ppe

Genuine article (1st August 2005)

Reports that ‘Genuine Saffire’ branded gas welding products are now only available direct from Murex or from an authorised Murex distributor.

From Plant machinery

Catalogue of accessories (1st April 2005)

Welding accessories from Murex Welding Products include personal protection products, welding tools and special process equipment.

From Construction site safety

Powered respirators (1st February 2005)

The Murex Multiflow range of powered respiratory systems comprises air filter unit, air hose and one of an approved range of head units.

From Breathing safely

Welding poster (1st December 2004)

With its comprehensive range of gloves and gauntlets, Murex Welding Products provides the welder with protection that conforms to all relevant European standards, including EN388, EN374 and EN407.

From Ppe

Welding range (1st December 2004)

Personal protection products, welding tools and special process equipment all feature in a new 70-page accessories catalogue available free from Murex Welding Products.

From Breathing safely

Free tips in guide (1st October 2004)

Useful Tips for TIG Welding is a new four-page guide available free of charge from Murex Welding Products. The guide provides a useful insight into successful and safe TIG welding.

From Plant machinery

Welding Protection (1st April 2004)

Murex claims its 9-13 Multiweld helmet represents state-of-the-arc technology in welder eyesight protection. It has a reaction time of just 1/20 000 of a second and provides both full ultraviolet and infrared protection. Welder comfort has been caref

From News

PARTNERSHIP FOR WELD RESPIRATION (1st February 2004)

One of the benefits of the partnership between Murex Welding Products and mask manufacturer 3M is a respirator performance guide. This is featured in the new Murex accessories catalogue.

From Ppe