Demag Cranes & Components Ltd, Technician lifts industry

Health & Safety Matters

hsmsearch.com

Click to visit http://www.toyota-forklifts.co.uk/EN/resources/Pages/default.aspx


	What next? Request further Information visit web site Send to friend Demag Cranes & Components Ltd company's profile

Click to visit http://www.uvex-safety.co.uk/

Poll : May

Will you be getting involved in EU-OSHA's Healthy Workplaces campaign?

This is an anonymous poll for statistical purposes only

Last Month's Poll

In the wake of the "Jerry Can" advice controversy, should Francis Maude have quit?

Yes : 56%

No : 44%

Follow Health & Safety Matters on Twitter

Technician lifts industry
November 1st 2010

Anthony Grainger, a service technician with Demag Cranes & Components, has been awarded the prestigious Cyril McCauley Memorial Prize by the Lifting Equipment Engineers' Association (LEEA). Anthony studied for the LEEA's Lifting Machines (Power) Diploma via a correspondence course, before sitting the examination in April 2010. He passed the diploma with distinction and in the opinion of the LEEA examination board, his paper was the best submitted by 54 candidates worldwide, earning him the Cyril McCauley Memorial Prize.

Anthony received a certificate and a commemorative plaque from LEEA president, John Kilby, at the organisation's Annual General Meeting, held at the Ricoh Arena, Coventry, in November.

Twenty nine year old Anthony joined Demag in 2000 as an apprentice, before graduating to the position of Service Technician in April 2003. He currently works within Demag's North East regional service team.

More articles from Demag Cranes & Components Ltd:

Major order for Demag from BMW (1st May 2012)

Demag Cranes has reinforced its position in the automotive sector with a major order from BMW. The company has received an order from the vehicle manufacturer to supply 28 cranes to serve press lines at its locations in

From Handling storing

Biomass lifting (1st February 2012)

Demag Cranes has installed a fully automated crane system at a combined cooling, heating and power (CCHP) plant, part of Sky's new 23,000m2 studio complex in Osterley, West London.

From Handling storing

Energetic offshore order (1st October 2011)

Demag Cranes & Components has won an order from Granada Material Handling to supply 164 electric wire rope hoists for a renewable energy project. The order comes in the wake of a contract – awarded to Granada by RWE np

From Handling storing

Smooth operator (1st May 2011)

Demag Cranes & Components has installed a crane system at Cantebury Cathedral’s new stone saw shop.

From Handling storing

Training to lift standards (1st February 2011)

Demag Cranes & Components has launched a new training course aimed at all users of lifting equipment, as well as those involved in repair, maintenance and service of such plant. The course, 'Safe Use of Lifting Tackle a

From Premises

Key standards (1st October 2010)

Lifting equipment manufacturer, Demag Cranes & Components, has reinforced its commitment to quality, health and safety and the environment with successful certification under three key industry standards.

From Handling storing

Crane aids expansion (1st June 2010)

Lifting equipment manufacturer, Demag Cranes & Components, has installed crane systems at IAE's production facility in Stoke-on- Trent. IAE manufactures agricultural feed handling equipment, industrial fencing and eques

From Handling storing

Specialist crane (1st May 2010)

Lifting equipment manufacturer, Hite has housed the LED light in a Demag Cranes & Components, has installed a specialist crane system at Enviropower's £12.5m energy from waste plant in Lancing, West Sussex.

From Handling storing

General overhaul (1st March 2010)

As lifting equipment and associated components age, efficiency and reliability can be compromised, resulting in higher operating costs and safety implications. To address these issues, Demag Cranes & Components recommen

From Handling storing

Give safety a lift (1st February 2010)

Lifting equipment manufacturer, Demag Cranes & Components, has installed two crane systems at Rainham Steel's Scunthorpe distribution centre, as part of the development of a new £1.3 million warehouse facility.

From Handling storing

Harvesting crane benefits (1st November 2009)

A specialist bale handling crane system has been installed by Demag Cranes & Components at Drax Power's new biomass processing facility at Goole, East Riding of Yorkshire. The plant processes straw into fuel pellets for

From Handling storing

Competitively priced hoists (1st November 2009)

New from Demag Cranes & Components, the competitively priced DC Action electric chain hoists have been designed for everyday, commodity lifting applications in the workshop environment and incorporate a range of erg

From Handling storing

Focus on safety (1st October 2009)

Focused on the continual improvement of workplace safety, Demag Cranes & Components is committed to an ongoing programme of investment and training initiatives, helping it to build on its reputation for health and safet

From Managing safety

High flying crane system (1st September 2009)

Demag Cranes & Components has won a 4.4 million Euro contract to supply crane systems for a new Airbus facility in Broughton, North Wales. The new 52,300m2 factory will house a composite wing assembly line for the compa

From Handling storing

Fall protection system (30th July 2009)

To meet requirements of the Work at Height Regulations 2005, Demag Cranes & Components has teamed up with workplace safety specialist, Latchways, to develop an innovative fall protection system.

From Slips trips falls

After sales service (1st July 2009)

Demag Cranes & Components has launched a new information pack detailing the scope of its after sales services business, including service repair and maintenance, spare parts, modernisation and refurbishment, inspection

From Training

Double girder (1st June 2009)

Demag Cranes & Components has supplied three Steelmaster crane systems to ParkerSteel for a new 14 acre steel processing and distribution facility at Shoreham Port.

From Handling storing

Single girder cranes (1st June 2009)

Components has supplied four crane systems to Composite Metal Flooring (CMF), for its new production facility.

From Handling storing

Building success (1st May 2009)

Materials handling specialist, Demag Cranes & Components, has supplied four crane systems to Composite Metal Flooring (CMF), for its new production facility.

From Handling storing

Bridging a gap (22nd April 2008)

Demag Cranes & Components and Able Lifting Equipment (Southern) have teamed up to provide a materials handling solution for Xyratex Technology, a provider of network data storage systems

From Handling storing

Substantial order for chain hoists (1st August 2007)

Demag Cranes & Components has supplied 124 electric chain hoists to Stoke-on-Trent-based distributor, Chains and Lifting Tackle (Midlands), for a client in the engineering sector.

All of the hoists are 1250kg SWL rated model

From Handling storing

Substantial order for chain hoists (1st August 2007)

Demag Cranes & Components has supplied 124 electric chain hoists to Stoke-on-Trent-based distributor, Chains and Lifting Tackle (Midlands), for a client in the engineering sector.

All of the hoists are 1250kg SWL rated model

From Handling storing

Geared for efficiency (1st June 2007)

Handling systems from Demag Cranes & Components have provided fitters at SSS Gears with total control of load movement, assisting in precision assembly and improving the efficiency of the production process As part of

From Handling storing

Hoist service (1st February 2007)

Demag Cranes & Components has completed a major refurbishment project at USAF Lakenheath.

The £1m contract involved the overhaul and restoration of 33 aircraft shelters used to house NATO F15 planes.

Fundamental to the proj

From Handling storing

Speed and accuracy (1st February 2006)

Six Steelmaster cranes from Demag Cranes & Components have helped improve lead times at ASD metal services' Leeds site.

From Handling storing

Heavy lifting (1st October 2005)

Two process cranes from Demag Cranes & Components’ BulkMaster range have been installed at Castle Cement’s North Wales production facility.

From Handling storing

EASY-TO-OPERATE CHAIN HOIST RANGE (1st December 2004)

A range of electric chain hoists has been introduced by Demag Crane & Components for everyday, commodity lifting tasks in workshop environments.

From Handling storing

CRANES GIVE LIFT TO NEW AIRBUS (1st October 2004)

Demag Cranes and Components has made and installed lifting equipment for Airbus Deutschland in Germany where fuselage sections are made for the Airbus A380. Assembly involves turning sections from vertical to horizontal position and back again, movin

From Plant machinery