Register | Login | Set as Home Page | Bookmark | General Enquiries | Help | Saturday, 04th of July 2009
Health & Safety Matters
 hsmsearch.com
Search 
Magazine 
Register for our ENewsletter
Click to visit http://www.cirrusresearch.co.uk/hsmsearch/index.php

Click to visit sponsors web site

Click to visit sponsors web site

Click to visit http://www.healthandsafetyevents.co.uk

Click to visit http://www.theenergyevent.com/

Poll

Should there be a maximum working temperature?
This is an anonymous poll for statistical purposes only


Last Month's Poll

Would a greater management presence on the shop floor improve health and safety in your workplace?

Yes - 58%

No - 42%

TORCHES CERTIFIED TO ATEX AND IECEx
October 1st 2007

Wolf Safety has introduced a new LED Primary Cell Torch range that is certified to ATEX and IECEx by Baseefa (2001).

The three torches in the TR-40 range incorporate high power leds, producing an intense white beam of about 0.5m diameter at 5m and a light source that is 'fitted for life'.

Each torch is powered by four AA alkaline primary cells, which will not only produce an optimum output for up to seven and a half hours duration, but will continue to provide a good light for up to 72h.

The TR-40 led Primary cell Torches are approved for safe use in Zone 1 and 2 hazardous areas, Group IIC T4 explosive gases, dusts and vapours. Weighing 360 grams, including batteries, they are one of the lightest led safety torches available.

The TR-40+ version has a low battery indicator, while a black TR-45 model is certified for use in Zone 0 gas environments.

More articles from The Wolf Safety Lamp Co: